Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Accessories/Parts

Nutcase Baby Nutty Pad Set
$5.00
Lose your kid's Baby Nutty Helmet pads? Or did they just get a little too much loving? Replacement pad sets for your Baby Nutty helmet. Each set comes with two of: - 3mm pads (front and rear) - 6mm pads (front and rear) - 6mm crown pad
Nutcase Metroride Pad Set
$5.00
No two heads are exactly the same. Give your Nutcase Metroride helmet an exact custom fit with removable and versatile foam pads in three different sizing sets. Comes in 3mm, 6mm and 9mm thicknesses.
Nutcase Street Foam Pad Set
$5.00
No two heads are exactly the same. Give your Nutcase Gen3 Street helmet an exact custom fit with removable and versatile foam pads in three different sizing sets. Comes in 3mm, 6mm, and 9mm thicknesses. Crown pad is 3mm thick. Please note: This pad set is meant as a replacement for worn out pads, and does not need to be purchased with new helmets. All Gen3 Small & Medium helmets come with one set of 3mm & one set of 6mm pads; Large comes with those two sets and the additional 9mm back pad.
Nutcase Street Visor
$5.00
To protect against bright sunlight and light rain, the Nutcase removable visor shades, shields and protects. Made from soft flexible rubber with a hard rubber fin that fits between the ABS plastic outer shell and EPS foam liner, the visor is perfect for unpredictable weather and sunny days alike. Visors are compatible with Street and Little Nutty helmets only, and will not fit with Metroride, Baby Nutty, Moto, Snow, or Water.
Louis Garneau H2 Helmet Cover
$29.99
When chilly, soggy weather rolls through, Garneau's H2 Helmet Cover keeps you both warm and dry. It's made from a polyurethane-coated spandex that's water resistant. The sealed seams and a snug stretch band that fits easily over your helmet also keep water from seeping in. Plus, when the sun's not shining, the high-visibility yellow color and reflective accents will help make you visible to others.
Louis Garneau Raid Visor
$9.99
The Raid Visor is specifically designed to function with Garneau’s Raid Helmet models. It offers easy installation thanks to its V-Plus fitting system and can be adjusted to several different positions to block the sun’s rays—ideal when you’re exploring the trails in the height of summer. - Specifically designed for the Raid helmet, this visor fits perfectly in the design
Louis Garneau Spiderlock 4D
$24.99
The Spiderlock 4D is the next generation in Garneau’s groundbreaking series of innovative helmet fit systems. The Spiderlock 4D provides unprecedented control over exactly how your helmet sits, with the introduction of a second mechanism— which allows you to tune the height, as well as the lateral fit. At just 26 grams, this is one of the lightest fit systems in the world of cycling. It’s also exceptionally stable, thanks to the four anchor supports—so you won’t be irritated by a helmet that wobbles in place or slips back over time. A large rubber adjustment wheel allows for easy corrections, even if you're wearing gloves. The Spiderlock 4D system is available with Garneau's Héros, Shine, Sprint and Raid models. - Compatible with the Héros MIPS RTR, Héros RTR, Shine MIPS RTR and Shine RTR helmets
Louis Garneau Spiderlock Pro II
$19.99
• Adjustable and detachable rack-and-pinion mechanism • Requires one hand to adjust • Compatible with the Diamond II and Quartz II helmets and all helmets sold with the Spiderlock Elite system • Adjustable angle
Louis Garneau Spiderlock Pro TT STD
$19.99
Garneau's Spiderlock Pro TT is a helmet stabilizing system independent from the strap system. It has a lightweight, ventilated polymer neck support for added comfort. Easily tightened on the head using only one hand thanks to its dented anti-slip wheel, it also offers several positions of adjustable inclination. It's compatible with the P-09 helmet as well as all helmets sold with the SpiderlockElite system (each sold separately).
Louis Garneau Spiderlock SL II
$14.99
• Adjustable rack-and-pinion system • Requires one hand to adjust • Includes ergonomic foam padding • Lightweight
Louis Garneau Visor Edge
$9.99
• Specifically designed for the Edge Helmet (sold separately) • Visor perfectly fits in the design • Easily adapts to all helmets featuring the V-Pro system
Louis Garneau Visor Le Tour
$9.99
• Specifically designed for the Le Tour Helmet (sold separately) • Easily adapts to all helmets featuring the V-Pro system
Louis Garneau Visor VX
$9.99
• Detachable rack-and-pinion mechanism that can be adjusted using only one hand to stabilize the helmet on the head • Compatible with Garneau's P-06, Course, Quartz II and Carve II helmets (each sold separately)
Light & Motion Vis Pro
$149.99
Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination. Featuring: - 600 Lumen Output Certified to the FL-1 Standard - Daylight Visible Pulse Mode - Integrated Battery Pack With Red Rear Lighting - Innovative Amber Sidelights Provides Critical Side Visibility at Intersections - Ultra-lightweight Setup With Easy Clip On/Off Design - Waterproof to 1 meter For All-Conditions Reliability - Accurate Battery Charge & Status Indicator - Micro USB Rechargeable Included: - Helmet Mounts & Micro USB Charging Cable
Knog PWR Helmet/GoPro Mount
$14.95
PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts. - Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain) - Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible - T Slot (For modular): Allows for quick release of the light when parking your bike - Weight: 20g
KASK Bambino Pro Visor
$69.95
Replacement visor for Kask's Bambino Pro TT helmet.
KASK Infinity Grid
$25.95
Kask's insect grid insert keeps insects from flying into your helmet.
KASK Vertigo (2.0) / 50nta MTB Visor
$25.95
Spare visor for Kask's Vertigo and 50nta mountain bike helmets.
KASK Winter Cap
$42.95
Kask's winter cap liner keeps your head toasty warm when the temperature starts to fall. One size fits most.
Giro Shields for Air Attack
$40.00
Always keep a spare. These are the same Carl Zeiss lenses that are on the original Giro Air Attack with Shield helmet (sold separately).
Giant Proshield Helmet Cover
$32.00
- Protextura Plus fabric for water-proof protection while maintaining high breathability - Designed to fit most helmets - Reflective trim and bright yellow color enhances visibility in low light or foggy conditions - Drawcord in the hem helps fit a wide variety of helmet shapes
CatEye Duplex Helmet Light SL-LD400
$29.99
Looking for a great around town lighting system at a very reasonable price? The Duplex is just that. Providing both headlight and rear light in one unit, the Duplex easily mounts to your helmet with an included rubber strap and provides up to 100 hours of run time on only two AAA batteries. The light is easy to operate and can be switched between constant beam and flashing modes simply by pressing and holding a button. Making yourself visible in city traffic can help motorists see you better, and a good helmet-mounted light that is worn on your head, up and away from the distraction of car lights, can really make you stand out in a sea of vehicles. Use your head, and use a light. Features - Dimensions: 70.5 x 28.5 x 23 mm - Weight: 51.5 g (with bracket and batteries) - Light source: White LED x1, Red LED x1 - Battery: AAA alkaline battery x2 - Mount: Rubber band (Long) Modes/Run Time - (Front) Constant mode (15 lumens): 100hrs - (Rear) Constant mode (10 lumens): 100hrs - (Front) Flashing mode (30 lumens): 100hrs - (Rear) Flashing mode (10 lumens): 100hrs
CatEye Helmet Mount
$11.95
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
Bike Peddler Take a Look Helmet Adapter
$4.99
- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror
Page 1 of 1